Marmitek Gigavideo 40 Servisní příručka stáhnout pdf (Strana 39)

Universal module (UM506)

230 VAC - 50 Hz - 5 A at 24 VDC LOAD RATING

Benefits

The UM506 contains an isolated

contact relay and a piezo sounder

(beeper). It can be set to operate

as a beeper only, as an isolated

contact relay only or both.

It can be set for momentary or

continous operation for the sounder

and/or isolated contact relay.

The isolated contact relay are rated

for 5 A at 24 VDC.

When set to continous operation

the relay contacts and/or the

module beeps continously when an

ON command is received. When an

OFF command is received the relay

contacts open and/or the beeper

stop.

When set for momentary

operationthe relay contacts close

and/or the beeper gives three or

four beeps when an ON command

is received. The relay contacts then

open automaticallyafter about 0,5

second and/or the beeper stops

automatically after three or four

beeps. In this mode, OFF

commands are ignored.

The module has a test (ON) button

and a unit OFF button.

Technical data

Supply voltage: 230 V ±10% 50 Hz

Supply current : ≤ 20 mA capacitive

Making capacity: 5 A at 24 VDC

EMC emission: according to EN 50081-1

EMC immunity: according to EN 50082-1

Electrical safety: according to EN 60950 and EN 60065

Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz

Input impedance: ≥ 55 Ω (L - N) at 120 kHz

Ambient temperature: - 10° C to + 50° C (operation)

- 20° C to + 70° C (storage)

Dimensions: 55 x 90 x 38 mm

(width x height x depth )

Key Features

w On/Off control of isolated contacts to switch any kind of low voltage

load.

w Can be set for momentary or sustained contact closure.

w Has a beeper to use as an annunciator.

1 2 ... 34 35 36 37 38 39

Komentáře k této Příručce

Žádné komentáře

Marmitek Gigavideo 40 Servisní příručka Strana 39

Komentáře k této Příručce

Související produkty a manuály pro Stmívače Marmitek Gigavideo 40