Marmitek SD833 Instalační příručka stáhnout pdf (Strana 2)

Short installation manual

If you follow the installation procedure mentioned below, you should not hear a

siren. Just to

be sure, we recommend you to wear hearing protection

during the

installation. This to prevent hearing impairment.

Quick installation of your ProGuard800 set

This manual is meant to install your ProGuard800 without having to read the regular

installation manual completely. Just the necessary operations are explained in this manual.

For safety warnings and a complete understanding of your ProGuard800 set please refer to

the installation- and user manual.

Requirements for the installation

x Screwdriver, crosshead

Screwdriver, slot, blade size 0,6 x 5,0 mm

Screwdriver, slot, blade size 0,5 x 3,0 mm

x Snap-off blade knife

x Electric drill

x Bit, stone 6 mm

Bit, metal 4 mm

x Marker

x ProGuard800 set consisting of:

x Control panel

x Motion sensor(MS845)

x Keyfob remote control (KR814)

x Door/window sensor (DS831)

x Telephone cord with RJ11 Connectors

Installing the control panel

Do not install the wireless components yet!

Find the right place for your control panel

The ProGuard800 control panel should be placed inside in a room with adequate ventilation.

The panel should be accessible for maintenance and control.

Do not place the panel in rooms with a high atmospheric humidity or temperature, or where

the panel can get in contact with water or other fluids. Try to place the panel as centrally as

possible in the room that has to be guarded. Make sure there is a 230V and a telephone

connection (if you do not place a GSM800) close to the panel and do not place the panel

within 30 cm of the group box or large metal objects. This could adversely affect the range of

the wireless connections.

ProGuard800™ - 2 -

1 2 3 4 5 6 7 ... 15 16

Žádné komentáře

Marmitek SD833 Instalační příručka Strana 2